Best composite decking
Wood-plastic composite (Professional name:“WPC”) is a composite
material lumber or timber made of recycled plastic and wood wastes.
1. Looks and feels like natural wood;
2. Durable, firm because of its high density; high degree of UV and
3. Highly resistant to moisture and termites; easy to install,
requires no painting, no glue, no maintenance;
4.100% recycle, environmental friendly, saving forest resources;
5. Barefoot friendly, anti-slip, no crack;
6. Weather resistant, suitable from -40 to 60 centigrade.
WPC material Component (approximate percent for reference):
25% HDPE (Recycled HDPE)
65% bamboo/wood fiber (Professionally treated dry bamboo/wood
10% chemical additives (Anti-UV agent, Anti-oxidation agent,
stabilizer, colorants, anti fungus agent, coupling agent,
reinforcing agent, lubricants...etc.).
MOQ(Minimum order quantity):1000meters/color(about 145sqm)
Material: WPC (wood plastic composites)
Material properties of WPC
1. WPC is a new kind of environmental friendly product that can
totally instead of wood ones through scientific innovation of waste
wood recycling and development. While conserving natural resources
at the same time, not only WPC have natural wood texture and grain,
but also have much performance such as water resistance, recycling,
corrosion resistance, mildew proof, no pollution, convenient
2. WPC producing and processing procedures are totally different
from wood. It can greatly save the production time, raw materials
storage costs, loss of raw material cost and processing cost.
Meanwhile, also can support temperature range from 60℃ to -40℃.It
can overcome natural cracking, warping, stains, mildew and other
natural defects of the natural wood.
3. WPC has its unique extrusion technology. Different molds can
produce a variety of specifications, size, shape, thickness of
profiles; also provide a variety of design, color and grain
4. Due to the use of raw materials and production process without
glue, it does not produce formaldehyde, benzene, ammonia,
trichloroethylene and other harmful substances.WPC is a new
alternative green environmental protection material to traditional
5. In the operation, WPC can be nailed, drilling, planing, and
viscous with smooth surface. Sanding and painting process is
subjected to client choice.
1.It can use same tools what use for wood processing, cutting,
drilling, edging and scratching.
2.Pull the drilling bit to bring out the debris at regular time
when drill large or deep hole. Don’t expect to complete a one-time
3.Tapping screw is best choice to install WPC profile because of
durable advantage. At least 5mm diameter, length is according to
thickness of profiles, generally between 50mm -60mm.In order to
avoid screws corroded, we strongly recommend the use of stainless
4.Compared with ordinary wood, nail WPC material is harder. In
order to avoid the nail out, can’t be a one-time hammering. Nail
should be tapped into 1.5-2cm,then knock into with a nailer.
5.Must be prior drilling when the climate is cold or the use of
6.Fix by two screws in each position while section width is greater
than 10 cm.
7.Considering the drainage, cleaning and minor expansion and
contraction and other reasons, WPC pieces must have adequate
clearance from edge to edge, head to head when installed.
Edge to edge: WPC side to side gap is at least 6 mm, if installed
in a cold climate, gap requires at least 10 mm.
Head to head: WPC head-to-head gap depends on the section length,
temperature when install,the coefficient of thermal expansion of
profiles ( ζ≈ 0.9 × 10 -4 ), as well as local highest temperature.
This is plastic wood composite decking OLDA-31 146*25MM install
instruction for reference.
You can choose other accessory on your part.